The problem of stuck inner and outer rings of the bearing   Due to assembly requirements, there is an axial seam on the outer diameter of the TIMKEN bearing outer ring. After the sealing ring is installed, the axial seam of the outer ring will increase due to the amount of interference. When it is increased…

The failure of rolling bearings is divided into dry goods!   Rolling NSK bearings are one of the indispensable basic components of running machinery. Although the rolling bearing is small in size and low in cost, once the rolling bearing fails, the loss to the running machinery and the entire production equipment is huge. With the…

4 stages of rolling bearing failure   The deterioration of rolling NSK bearings is not a linear process, but an exponential process. In different degradation stages, the fault information appears in different frequency bands, so different fault detection methods must be adopted. At present, the industry generally believes that the degradation process of rolling bearings can…

Three ways to identify bearing faults   Bearings are precision parts of mechanical equipment. How to increase productivity in factories, first of all, the performance of mechanical equipment must be good, and the TIMKEN bearing is closely related to the performance of mechanical equipment. Therefore, the factory must carry out necessary inspections of the bearings in…