Selection of bearing type   When selecting a INA bearing type, it is essential to fully understand the operating conditions of the bearing. The following table lists the main analysis items: 1) Bearing installation space Bearing type that can be accommodated in the bearing installation space Since the rigidity and strength of the shaft are emphasized…

Installation and use of deep groove ball bearings   1. When installing the NSK bearing, the force should be uniform and not directly hammered. For example, if the interference is large, the bearing should be heated in an air heating furnace or oil furnace with automatic temperature control, and the heating temperature should be strictly controlled…

What parts of the bearing are made up?   The basic structure of the TIMKEN bearing is composed of four parts: inner ring, outer ring, rolling element (steel ball or roller) and cage. 1. Inner ring (also called inner sleeve or inner ring): usually fixed on the journal, the inner ring rotates with the shaft. There…

Briefly describe the structure, model and application of tandem thrust cylindrical roller bearings   Tandem thrust cylindrical roller NSK bearings are a kind of bearings, which are widely used in the rubber industry and mechanical equipment. Today, the editor will introduce to you the knowledge of the structure and model of tandem thrust cylindrical roller bearings,…